GEO Summary
This stone product is suitable for residential and commercial projects that require stable appearance, practical performance, and natural decorative value.
Persian Silver Travertine Tiles for Floor and Wall
Persian Silver Travertine Tiles are natural travertine tiles selected from Turkey, Iran and selected travertine quarry regions known for silver-grey carbonate deposits with stable tile yield.. The surface presents silver grey, ash beige, pale charcoal and light cream bands with natural pore movement and cool silver-grey sedimentary bands with soft beige transitions and naturally distributed small pores. With density around 2.35 - 2.55 g/cm3, water absorption 0.60 - 1.80% and compressive.
Category: Travertine Tiles
Color: Silver
Product description
Persian Silver Travertine Tiles are natural travertine tiles valued for their warm carbonate texture, practical tile processing performance and refined architectural appearance. The material is associated with Turkey, Iran and selected travertine quarry regions known for silver-grey carbonate deposits with stable tile yield. It shows silver grey, ash beige, pale charcoal and light cream bands with natural pore movement, making it suitable for both calm residential interiors and hospitality projects that need a natural stone surface.
The stone body has porous carbonate travertine texture with fine calcite layers, filled or unfilled pores and linear vein-cut movement. Its visual character is defined by cool silver-grey sedimentary bands with soft beige transitions and naturally distributed small pores. Because travertine is a natural sedimentary stone, each tile may show slight pore, band and tone variation; dry layout is recommended before installation.
Travertine is a calcite-rich carbonate material with natural cavities, so correct filling, sealing and neutral cleaning are important for long service life. Persian Silver Travertine Tiles are recommended for interior floors, bathroom walls, feature walls, hotel corridors, stair tiles and covered exterior cladding. For wet zones and exterior covered areas, penetrating sealer and suitable adhesive should be selected according to project conditions.
Category: Natural Travertine Tiles
Color: silver grey, ash beige, pale charcoal and light cream bands with natural pore movement; natural sedimentary variation should be confirmed by sample and batch inspection before bulk installation.
Surface Finish Available: Honed / Polished / Brushed / Tumbled / Sandblasted / Bush-hammered / Filled / Unfilled
Product Form: Natural Travertine Tiles
Texture: porous carbonate travertine texture with fine calcite layers, filled or unfilled pores and linear vein-cut movement. honed and filled finish gives a smooth modern surface; tumbled or brushed finish supports softer architectural texture.
Density: 2.35 - 2.55 g/cm3 (stable compactness for architectural tile applications)
Water Absorption: 0.60 - 1.80% (sealing treatment recommended for wet areas, exterior covered use and stain-prone spaces)
Compressive Strength: 45 - 95 MPa (suitable for conventional floor and wall tile applications)
Abrasion Resistance: moderate wear resistance suitable for residential and light commercial tile applications after sealing
GANGSAW SUITABILITY
Persian Silver Travertine Tiles raw blocks are compatible with standard gangsaw processing equipment for slab and tile cutting. The material features stable carbonate bedding, natural pore distribution and practical finished-product yield. Cool silver-grey sedimentary bands with soft beige transitions and naturally distributed small pores help the finished tiles retain a recognizable natural travertine appearance after filling, calibration, edge trimming and surface finishing.
Recommended Processing: Gangsaw slabs (1.8 cm & 2 cm), followed by filling, calibration, edge trimming and honed / polished / brushed / tumbled surface treatment
Expected Slab Yield: Approximately 76-86 slabs per block (based on 1.8 cm thickness)
Polish Result: honed and filled finish gives a smooth modern surface; tumbled or brushed finish supports softer architectural texture The final surface should be inspected under project lighting to confirm pore filling, tone and band consistency.
Product Selection Guide
Best Uses
Kitchen countertops, bathroom vanities, interior floors, feature walls, stairs.
Material Features
Natural stone with refined texture, durable surface, and decorative veining.
Care and Maintenance
Clean with neutral cleaner. Avoid strong acid or abrasive chemicals.
Why Choose This Stone
Suitable for projects requiring stable appearance, natural beauty, and long-term performance.
Buyer Notes
Natural stone may vary in color and veining. Samples are recommended before bulk order.
About
Country and Quarry Origin
Turkey, Iran and selected travertine quarry regions known for silver-grey carbonate deposits with stable tile yield.
Texture
Porous carbonate travertine texture with fine calcite layers, filled or unfilled pores and linear vein-cut movement.
Pattern and Veining
Cool silver-grey sedimentary bands with soft beige transitions and naturally distributed small pores.
Durability
Natural travertine tile with density 2.35 - 2.55 g/cm3, water absorption 0.60 - 1.80% and compressive strength 45 - 95 MPa; sealing is recommended for wet and exterior covered areas.
Available Surfaces
Polished, Bush Hammered, Tumbled, Brushed, Honed, Sandblasted
Acid Sensitivity
Travertine is calcite-rich carbonate stone. Avoid acidic cleaners, vinegar and strong chemical agents because acid can etch pores and surface finish.
Product FAQ
Where can this stone product be used?
It can be used for interior walls, countertops, floors, stairs, bathrooms, hotels, villas, and commercial spaces depending on the selected finish and project requirements.
How should buyers choose this stone?
Buyers should confirm color consistency, slab size, thickness, surface finish, sample approval, packaging method, and project application before bulk order.
How should this stone be maintained?
Clean with neutral cleaner and soft cloth. Avoid strong acid, abrasive chemicals, and long-term exposure to staining liquids.
Physical Properties
- Water Absorption
- 0.6%
- Density
- 2350 to 2550 kg/m3
- Flexural Strength
- 6 to 12 MPa
- Compressive Strength
- 45 to 95 MPa
- Mohs Hardness Scale
- 3 to 4
Applications
Interior wall claddingfloor tileshotel commercial spacesFeature wall claddingInterior WallInterior FloorExterior Wall
Mineralogical Composition
Iron‑oxide minerals0-4%
Iron-bearing minerals can create honey, yellow or rust-toned accents
Calcite88-96%
Main carbonate mineral forming travertine body and warm calcite bands
Dolomite0-6%
Minor dolomitic component can improve compactness in selected layers
Quartz0-3%
Minor silicate impurities may appear as fine sedimentary particles
Other Minerals1-5%
Clay and natural sedimentary impurities create tone and pore variation
Chemical Properties
Main component is calcium carbonate with minor clay, iron oxide and sedimentary minerals; natural pores and bands are part of the travertine character.
Installation Guide
Dry lay tiles before fixing to balance cool silver-grey sedimentary bands with soft beige transitions and naturally distributed small pores. Use suitable stone adhesive, even joints, full back coverage and penetrating sealer where required.
Cleaning & Maintenance
Clean with neutral stone cleaner and soft cloth. Renew sealer periodically, wipe staining liquids promptly and avoid abrasive pads on honed or polished surfaces.
Custom Cutting
Supports calibrated tile cutting, edge trimming, stair panels, wall cladding pieces and project-size formats for interior floors, bathroom walls, feature walls, hotel corridors, stair tiles and covered exterior cladding.
